Smart Glass Technologies
New York conference room behind clear PriWatt privacy glass

PriWatt™ glass · New York

Choose a view or a frosted finish.

PDLC Smart Glass in New York City

Specify switchable laminated glazing for New York offices, homes and care spaces. Smart Glass New York coordinates measurement, panel planning and installation for a clear-to-frosted finish.

Get NYC pricing
Made in the USAUL certifiedIntertek certifiedInstalled across NY, NJ & PA

About the product

Meet switchable glass.

PriWatt™ combines laminated safety glazing with an internal PDLC liquid-crystal layer. Power aligns the crystals for a transparent view; switching off diffuses light for a frosted appearance. It suits new office partitions, bathroom dividers and replacement glazing where a permanent blind would interrupt the design.

Control options

Switch it your way.

Phone app, remote, wall switch or voice.
Pick what suits your New York space.

New York office with clear smart glass meeting room walls
ClearMeeting room
9:41
SMART GLASS

Meeting room

Glass privacy

Clear

Smartphone

Your space, at a touch.

SGT

Remote

Control within reach.

Wall switch

Simple. Familiar. Instant.

Voice & Wi-Fi

Alexa or Google Home.

TECHNICAL SPECIFICATIONS

Review PriWatt glass performance for New York residential, workplace, hospitality and clinical specifications. Confirm the complete assembly against site conditions, exposure and intended use.

ELECTRICALTECHNICALOPTICAL
Voltage while clear60VAC · 50/60HzGlazing buildLow-iron glass, heat-treated or fully temperedLight transmission — clear88–91%
Electrical demand< 0.5 W per sq ftGlazing choicesSelected tinted panes and colored interlayers supportedDirect light transmission80% ON · 7% OFF
Service temperature-10 to 60 °CLargest panel70 in × 143 inHaze level99% OFF · 2.4% ON
Clearing time< 200 msPanel thickness3/8 in, 1/2 in or 9/16 in · ~5 lbs/sq ftUV rejection99% (365–380 nm)
Frosting time< 10 msFabrication optionsAvailable with curves, drilled holes, notches and cut-outsIR rejection20% ON · 80% OFF
Acoustic ratingSTC ~37Switch-cycle rating> 2 million cyclesSolar heat gain coefficient0.74 ON · 0.31 OFF
Clear viewing angle170°
Download the manual (PDF)Get NYC pricing

How it works

Privacy built into the laminate.

Inside Smart Glass Original, a PDLC layer sits between bonded glass lites. Its electrical state determines whether light passes directly through or scatters into a frosted finish. Privacy mode retains diffuse light rather than creating blackout.

PDLC smart glass layers: glass, polymer, ITO, PDLC liquid crystals, ITO, polymer, glass
Inside PDLC glass Layer construction · schematic illustration

What happens inside the panel

Microscopic liquid-crystal droplets sit in a polymer layer between two conductive ITO coatings, sealed inside laminated safety glass.

Aligned liquid crystals letting light pass straight through
Power on · Clear

Lined up, see-through.

Current aligns the crystals so visible light passes straight through the privacy glass.

Randomly arranged liquid crystals scattering light for privacy
Power off · Private

Scattered, frosted.

Without current the crystals fall out of line and diffuse the light — the room stays bright, the view disappears.

Smart glass conference room in the clear state
Power on

Wide open and bright.

Transparent glass keeps the spaces connected.

Smart glass conference room in the private state
Power off

Private the moment you need it.

Frosted glass separates the room visually.

Compare

Compare Glass Original PDLC with Reverse PNLC

Standard privacy mode

Original glass · PDLC

Apply power for a view; switch off for frosting.

  • With powerTransparent — visible light 88–91%, haze 2.4%
  • Without powerFrosted — haze 99%
  • If supply failsReturns to frosted
  • Typical usesResidential privacy and suitable exterior glazing
  • Power requiredDuring transparent operation
Request NY pricing
Alternate power logic

Reverse glass · PNLC

Switch off for a view; apply power for frosting.

  • Without powerTransparent — visible light 91%, haze 2.4%
  • With powerFrosted — haze 94%
  • If supply failsRemains transparent
  • Typical usesWorkplace glazing with a softer privacy finish
  • Power requiredDuring frosted operation
Discuss your project
Smart Glass New York installers fitting a glass partition

Local installation · New York

Smart glass,
installed by a local crew.

We don't just ship privacy glass — our New York crew measures your openings, installs the glass and switches it on — from Midtown towers and Brooklyn lofts to Long Island, New Jersey and Philadelphia.

We run the power and controls, test every panel with you and only hand over once everything switches perfectly.

Book a site visit

FAQ

New York glass: planning questions

How is a New York glass project priced?

Panel dimensions, laminate specification, cable routing and building access determine the estimate. Share your measurements for a tailored quote within 24 hours.

What is inside a PriWatt™ panel?

A PDLC film is bonded within laminated architectural safety glazing. Available builds include low-iron, heat-strengthened and tempered glass, selected for the opening.

Which finish remains without electricity?

Original PDLC returns to frosted and continues transmitting diffuse daylight. Reverse PNLC remains transparent when the supply is interrupted.

What switching speed can I expect?

The transition to transparent takes under 200 milliseconds; frosting takes under 10 milliseconds. Both appear nearly immediate in everyday use.

Does frosted glass completely hide everything?

The frosted state has 99% haze and obscures direct views, but silhouettes can remain visible close to the pane or under strong backlighting. It is not blackout glazing.

What are the panel size limits?

The maximum is 70 × 143 inches, with 3/8, 1/2 or 9/16 inch builds. Larger partitions combine panes; custom curves and cut-outs require fabrication review.

Can outside openings use smart glass?

Suitable exterior assemblies can incorporate the panel into insulated glazing. Door movement, edge protection and frame wiring must be planned before production.

Who handles New York installation planning?

Smart Glass New York coordinates measurements, fitting and commissioning, with an electrician handling the power connection. We discuss co-op approvals, elevator bookings and access before scheduling.

Get NYC pricing

Local installation · New York

Tell us about your space.

From the first measurement to the final switch-on, one New York team handles your privacy glass project.

Get an estimate